Pellets Ø 6 mm bagware 15 kg

The RZ wood pellets Ø 6 mm bagware 15 kg are particularly suitable for dosed filling of small pellet stoves, e.g. in your living room. Wood pellets are an alternative to conventional heating methods with fossil fuels such as heating oil or gas. Sawing and planing chips for the RZ Wood pellets are obtained exclusively from sawmills from Austria. This ensures that the raw material comes from sustainable forestry.

Automatic fuel transport
The small diameter of 6 mm is ideal for automatic fuel production. Fill the entire stove with RZ wood pellets and your fireplace stove will automatically convey the pellets. So your fireplace ensures a pleasant and constant radiant heat in your home.

High energy efficiency and heating comfort
The pellets have a low residual moisture of less than 10 percent, which increases the calorific value to 4.8 KWh/kg and thus enables an optimal energy yield: the burning capacity of 2 kg of wood pellets corresponds approximately to that of 1 l of heating oil. Thanks to the low ash content of less than 0.5 percent, which remains after burning, you ensure a clean combustion and require less effort for maintenance or cleaning of your heating system.

Low-emission heating
Due to the high compression, the pellets have a low abrasion value of approx. 1 percent. This achieves better efficiency and clean flue gases. Not only is the combustion of pellets much more environmentally friendly than fossil fuels, but also the production. Pellets are pressed from native woods, which allows short transport distances. In addition, thanks to their high bulk density of 650 kg/m3, pellets have a significantly lower storage space requirement compared to other fuels. The specific weight, i.e. the material density, is 1.12 kg/dm3, which corresponds to the quality requirements for wood pellets.

Technical data
– Diameter: 6 mm
– Calorific value: > 4.8 KWh/kg
– Abrasion value: approx. 1 percent
– Residual humidity: < 10 percent
– Ash after combustion: < 0.5 percent
– Bulk weight: > 650 kg/m³
– Spec. Weight: > 1.12 kg/dm³